Slushy Machine
Can I run the slushy machine with one tank or two tanks at the same time?
Yes, there is a independent switch for these A/B tank.
What the weight of the Slushy machine?
The slushy machin with two tanks weight is about 90 pounds.
Can this Slushy machine can be used for Parties?
Yes, It is suitable for parties
Can I use the bletilla striata (sucrose) instead of sugar?
This is not guaranteed, because there is water in the sucrose. As long as the sugar content of the entire raw material exceeds 14%, if a freezing jar appears, it means that the sugar is not enough.
How should I adjust the proportion between alcohol and Sugar?
This machine is not designed for sugar-pure alcohol liquids. Make sure the total of sugar and pure alcohol is more than 14% (e.g. 7% sugar and 7% pure alcohol, or 4% sugar and 10% pure alcohol, or 14% sugar and 0% alcohol).
What is the upper of alcohol and Sugar for this slushy machine?
Normally, there is no the upper limit . Generally, but lowest limit of 14%. Of course, the higher the sugar content may be, it may be made from this smoothie, and the hardness may not be as hard, because the higher the sugar content, the higher the ...
How to make a good shape and tasted slushy?
For slush to maintain good shape and taste, the distribution ratio of sugar and alcohol is generally 14%-20%.
What is the dimensions of the fan built-in the slushy machine?
The dimension is 210*206*73mm
Is there a recipe for the slushy machine?
Sorry that there is no exact recipe because everyone has different favoriate tastes.When making it, just meet two conditions: 1. The raw material is liquid 2. The sugar or alcohol content is more than 14%
How often we should clean this slushy machine?
It is suggested to clean this machine every 2-3 days.If you have enough time, you can clean it everyday.
Why is there oil lefton the pipe of my slushy machine?
Don't worry, we applied food upgarde lubricating oil to protect the steel cylinder. You can clean it for the first time.
Why is the faucet of my new slushy machine leaking?
Please replace the plunger seal and apply lubricant to the o-rings. Usually, the seal is a little worn, which will cause leakage. Applying lubricant can prevent the seal from being damaged.
What does it mean when the values on the slushy machine display are changing?
The number after a b represents the current temperature in degrees Celsius.
What is the minimum amount of materials required when using this slushy machine?
It is generally recommended to add the materials at least to the red line position, and the maximum amount is the position marked with Max on the cylinder.
Why is there a clicking sould from my slushy machine?
The sugar content in the mist must be as specific or you will get the clicking sound which sound like the machine is broken. Please do：1. Increase the proportion of sugar 2. Reduce the water content in the original ratio
Why my slushy machine make a loud noise?
No worry, it is normal. This slushy machine is a commercial machine equipped with a high-power compressor. A powerful fan is used to ensure the machine cools down quickly and creates delicious slush. Therefore, when the machine is working, the main ...
Why the Led or LCD screen doesn’t work?
Maybe the buttons are blocked by stickers, or the screws on the back of the display board are tightened too much, so the buttons are blocked. Please try loosening the screws a little, especially the one near the function buttons. This will allow the ...
Why only one side of my slushy machine can work?
Please kindly help us confirm the following points: 1.This machine can work well under strictly controlled liquid ratios, please ensure the ratio of sugar to pure alcohol exceeds 14% (for example, 7% sugar and 7% pure alcohol, or 4% sugar and 10% ...
Why my slushy machine is leaking?
Wondering which part of the machine is leaking? 1.Please kindly check whether the material cylinder is damaged . If yes, it may be caused by not firm installation of the material tank,Lubricant must be applied when installing the water tank in order ...
4.Why my machine can not be cool and not making slushy?
1.Please check whether the AB indicator light is on. 2.Check the gears of cylinders A and B. It may be that the gears are set too low, causing the machine to not cool down 3.Let the machine run for 2 hours and see what temperature is displayed on the ...
How to change viscosity of the slushy?
1.Press A/B/C button can change viscosity setting for each bowl .Viscosity level from 1-10,level 1 is softest and level 10 is hardest.Factory default level 4 For example,change A bowl viscosity: Press A button ,screen show means A bowl viscosity ...
Why does my slushy machine keep counting down?
The countdown of two minutes indicates that the compressor only needs to work for two minutes before it reaches the desired firmness setting.you can adjust the thickness by press A/B button.Press A/B/C button can change viscosity/thickness setting ...
Tank A is not working but augerturning, the indicator light on A is off, and there is no ice.
1. Please do factory reset as video and check when do factory reset ,when A light is ON what number display at screen ,the number should near 250. 2.Please setting the hardness level for A tank to number 04. If it still doesn’t work, could you please ...