Ice maker
Placement Environment Requirements for Ice maker
Placement Environment Requirements Commercial Ice Machine Placement Environment Requirements: I. Space Requirements The commercial ice machine should be placed in a well-ventilated area. This helps the ice machine dissipate heat, preventing ...
Why the Display Shows Water Shortage Protection
Display Shows Water Shortage Protection Causes and Solutions: 1.Check if the water inlet valve is open and if the water pressure is sufficient and continuous. 2.Check if the ice-making drain is continuously draining water. If so, clean the drain ...
Why Normal Display and Water Flow but No Ice Production
Normal Display and Water Flow but No Ice Production Solutions: 1.If the machine lacks sufficient ventilation space, turn it off and check if the display temperature exceeds 40°C. If it does, pull out the machine, allow it to cool, and restart. 2.If ...
Why the"Ice Full" Display on Startup
"Ice Full" Display on Startup Causes and Solutions: 1.If the ice full switch is not properly secured, reattach it. 2.If the ice diverter panel has fallen or is incorrectly installed, adjust and reinstall it. 3.If both the ice full switch and ice ...
Why the Frost Formation on the Ice Tray or Irregular Ice Formation
Solution: Clean the water pump and spray pipes.
Why the Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank?
Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank Causes: The tank drain pipe is not properly secured. Excessive water pressure. The water tank has shifted out of position. Solutions: 1.If the tank drain pipe (rubber ...
Common fault code processing of ice machine (650 LBS/24H, 400 LBS Storage Capacity SKU:7031751/7031754)
Common fault code processing of ice machine Code-E03-Reason for defrosting timeout: 1. Mode setting problem 2. No refrigeration 3. 3. Scale blocking the spray pipe, causing ice cubes to not form Code-E04-Reason for water shortage protection: 1. Water ...
Common fault code processing of ice machine(100lbs/24H Stainless Steel Freestanding Commercial Ice Machine with 33 Lbs Storage Capacity )
Code-FULL: ice full shutdown Reason: 1. Ice cubes press the skateboard 2. Magnetic control falls off or the skateboard is not installed 3. Magnetic control switch or main board failure Code-E4: De-icing timeout failure Reason: 1. mode setting problem ...
How long can ice cubes be kept in a storage bin? Are storage bins refrigerated?
The storage box can be kept warm, but not refrigerated. The storage time is related to the ambient temperature and the amount of ice stored. After the ice cubes are filled, they can be stored for 8-12 hours without melting.
Can this ice maker machine work with the ice box separated?
Yes. This will work. The machine head can work alone. Just make sure you can place a platform to support the top onto the larger binding.
Ice Maker Installation Video
https://youtu.be/YzSo19TyO4k
Why does my ice maker not make ice but circulate water?
Please kindly help us do the following troubleshooting methods: 1.Check whether the compressor is started 2.Is the ice making time set correctly? Set the ice making time to 0 first and try it out. 3.When working, does the air from the heat ...
Why is my ice maker not making ice? It was working before, but now it is completely off
Please kindly help us do the following troubleshooting methods: 1. Check whether the reading plate is blank 2. Check whether the power supply is working properly If the reading board is blank and there is no problem with the power supply, Could you ...
Why won't my ice maker turn on?
Please kindly help us do the following troubleshooting methods: 1. Check whether the reading plate is blank 2. Check whether the power supply is working properly If the reading board is blank and there is no problem with the power supply, Could you ...
Why is the ice cubes from my ice maker too thick?
1. The ice making time may be set too long. Press the down button to adjust the ice making time a little shorter. There is no specific time, this is related to the ambient temperature. The factory time is set to 0 by default. Adjust the time ...
Why is my ice maker showing E4 not making ice？
E4 Refers to de-icing timeout fault. 1.Is the ice making time adjusted normally? 2.Is there the air coming out of the heat dissipation port to see if it is hot. If it is warm air, there should be no fluorine leakage. You can ask him to press the ...
Why my ice maker can not make ice when I used it first time?
If you can't make ice for the first time, you have to eliminate them one by one. 1. Is there water flowing after turning on the machine. 2. Is there fluorine leakage. 3. Is the ice making time setting correct. In addition, if the machine stops ...
Others:My questions are not included
Please kindly contact our Customer Support at Service@callsupports.com.