Why won't my ice maker turn on?
Please kindly help us do the following troubleshooting methods:
1. Check whether the reading plate is blank
2. Check whether the power supply is working properly
If the reading board is blank and there is no problem with the power supply, Could you please kindly send us a short video for our reference at Service@callsupports.com ?
it may be that a capacitor on the motherboard is burned out and needs to be replaced with a capacitor of more than 20A. Or replace the entire motherboard.
Related Articles
Why my ice maker can not make ice when I used it first time?
If you can't make ice for the first time, you have to eliminate them one by one. 1. Is there water flowing after turning on the machine. 2. Is there fluorine leakage. 3. Is the ice making time setting correct. In addition, if the machine stops ...
Why is my ice maker showing E4 not making ice？
E4 Refers to de-icing timeout fault. 1.Is the ice making time adjusted normally? 2.Is there the air coming out of the heat dissipation port to see if it is hot. If it is warm air, there should be no fluorine leakage. You can ask him to press the ...
Why Normal Display and Water Flow but No Ice Production
Normal Display and Water Flow but No Ice Production Solutions: 1.If the machine lacks sufficient ventilation space, turn it off and check if the display temperature exceeds 40°C. If it does, pull out the machine, allow it to cool, and restart. 2.If ...
Placement Environment Requirements for Ice maker
Placement Environment Requirements Commercial Ice Machine Placement Environment Requirements: I. Space Requirements The commercial ice machine should be placed in a well-ventilated area. This helps the ice machine dissipate heat, preventing ...
Why is the ice cubes from my ice maker too thick?
1. The ice making time may be set too long. Press the down button to adjust the ice making time a little shorter. There is no specific time, this is related to the ambient temperature. The factory time is set to 0 by default. Adjust the time ...