Why the"Ice Full" Display on Startup

• Related Articles

• Why the Display Shows Water Shortage Protection

  Display Shows Water Shortage Protection Causes and Solutions: 1.Check if the water inlet valve is open and if the water pressure is sufficient and continuous. 2.Check if the ice-making drain is continuously draining water. If so, clean the drain ...

• Why Normal Display and Water Flow but No Ice Production

  Normal Display and Water Flow but No Ice Production Solutions: 1.If the machine lacks sufficient ventilation space, turn it off and check if the display temperature exceeds 40°C. If it does, pull out the machine, allow it to cool, and restart. 2.If ...

• Common fault code processing of ice machine(100lbs/24H Stainless Steel Freestanding Commercial Ice Machine with 33 Lbs Storage Capacity )

  Code-FULL: ice full shutdown Reason: 1. Ice cubes press the skateboard 2. Magnetic control falls off or the skateboard is not installed 3. Magnetic control switch or main board failure Code-E4: De-icing timeout failure Reason: 1. mode setting problem ...

• Common fault code processing of ice machine (650 LBS/24H, 400 LBS Storage Capacity SKU:7031751/7031754)

  Common fault code processing of ice machine Code-E03-Reason for defrosting timeout: 1. Mode setting problem 2. No refrigeration 3. 3. Scale blocking the spray pipe, causing ice cubes to not form Code-E04-Reason for water shortage protection: 1. Water ...

• Why is my ice maker showing E4 not making ice？

  E4 Refers to de-icing timeout fault. 1.Is the ice making time adjusted normally? 2.Is there the air coming out of the heat dissipation port to see if it is hot. If it is warm air, there should be no fluorine leakage. You can ask him to press the ...