Why is there so little water flow into my chiller's tank?
1. Please clean the water pipes regularly to keep the water flowing smoothly.
2. Strongly twisted water pipes will block water flow. Please adjust the water pipe to ensure smooth flow.
3. Please submerge the entire water pump below the water level.
4. Is the height difference too high? You can adjust the water pumping height appropriately.
5. Check whether the water pump is blocked by foreign matter
Related Articles
Why the Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank?
Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank Causes: The tank drain pipe is not properly secured. Excessive water pressure. The water tank has shifted out of position. Solutions: 1.If the tank drain pipe (rubber ...
Why Normal Display and Water Flow but No Ice Production
Normal Display and Water Flow but No Ice Production Solutions: 1.If the machine lacks sufficient ventilation space, turn it off and check if the display temperature exceeds 40°C. If it does, pull out the machine, allow it to cool, and restart. 2.If ...
Why doesn't my chiller get cool the water?
Please kindly help us confirm the following information: 1. Please check whether the work indicator light is on. 2. What is the ambient temperature and the temperature setting on the chiller? 3. What is the temperature displayed on the chiller and ...
Why doesn't my chiller work?
Please kindly help us confirm the following information: 1.Could you please kindly advise us the current temperature of water and the temp you set? Because the set temperature must be 5° lower than the actual water temperature for the chiller to work ...
How to set this chiller?
1.Turn on the switch, the display shows what the current ambient temperature is. 2.Press the SET key to set our target temperature, for example, we want to reach 73°F 3.After the setting is complete, the screen will display the current temperature ...