Why doesn't my chiller work after placing different place to use?
1.Make sure the water pump and chiller are plugged in.
2.After the machine is started, the machine will start for a few minutes and will not cool down immediately.
If the set temperature is similar to the water temperature, the water will not cool down (please set the temperature range larger). For example, mine is set to 61, which has a 4-degree delta, so it will continue to work at 65 degrees until it reaches 61 degrees and cycle from there. Please adjust it and give it a try.
Related Articles
Why the Led or LCD screen doesn’t work?
Maybe the buttons are blocked by stickers, or the screws on the back of the display board are tightened too much, so the buttons are blocked. Please try loosening the screws a little, especially the one near the function buttons. This will allow the ...
Why doesn't my chiller work?
Please kindly help us confirm the following information: 1.Could you please kindly advise us the current temperature of water and the temp you set? Because the set temperature must be 5° lower than the actual water temperature for the chiller to work ...
Can I use the Chiller with 110V?
The chiller in US version is 110V, EU version is 220V. You can use it with 220V through transformer
Why does the pump of my transfer tank not work the first time I use it?
Maybe the pump head is stuck, Please kindly try to loosen the 3 screws and use it to check if it can work well.
Why doesn't my chiller get cool the water?
Please kindly help us confirm the following information: 1. Please check whether the work indicator light is on. 2. What is the ambient temperature and the temperature setting on the chiller? 3. What is the temperature displayed on the chiller and ...