Why doesn't my chiller get cool the water?
Please kindly help us confirm the following information:
1. Please check whether the work indicator light is on.
2. What is the ambient temperature and the temperature setting on the chiller?
3. What is the temperature displayed on the chiller and the actual temperature of the water?
4. Please check whether the fan is working.
5. Please check whether there is hot air discharged from the air outlet when the compressor is working.
6. Does the display show LLL?
Please kindly contact Customer Support at Service@callsupports.com with this important information.
Related Articles
Why the Led or LCD screen doesn’t work?
Maybe the buttons are blocked by stickers, or the screws on the back of the display board are tightened too much, so the buttons are blocked. Please try loosening the screws a little, especially the one near the function buttons. This will allow the ...
4.Why my machine can not be cool and not making slushy?
1.Please check whether the AB indicator light is on. 2.Check the gears of cylinders A and B. It may be that the gears are set too low, causing the machine to not cool down 3.Let the machine run for 2 hours and see what temperature is displayed on the ...
Why is there so little water flow into my chiller's tank?
1. Please clean the water pipes regularly to keep the water flowing smoothly. 2. Strongly twisted water pipes will block water flow. Please adjust the water pipe to ensure smooth flow. 3. Please submerge the entire water pump below the water level. ...
Why doesn't my chiller work after placing different place to use?
1.Make sure the water pump and chiller are plugged in. 2.After the machine is started, the machine will start for a few minutes and will not cool down immediately. If the set temperature is similar to the water temperature, the water will not cool ...
Why doesn't my chiller work?
Please kindly help us confirm the following information: 1.Could you please kindly advise us the current temperature of water and the temp you set? Because the set temperature must be 5° lower than the actual water temperature for the chiller to work ...