5kw/8kw Diesel Heater(RED):Solution Of Fault code E10 "Unsuccessful startup"
1)The temperature of the casin is too high,and it
failed to cool the casing after start ing for 3 minutes
2) There is a large amount of white smoke in the
exhaustgas
2.1)Check if the filter screen next to the ignition
plug is clean.If it is not clean,clean orreplace it
2.2) Check if the oil pump sprays oil forcefully
2.3) Check if the ignition plug is aging
3)There is a small amount of white smoke or no
smoke in the exhaust gas
3.1) Check for oil shortage,frozen or blocked oil
circuits
3.2) Check if the oil pump is stuck or damaged,
andif the oil pump is not functioning properly
3.3) Check if the combustion intake and exhaust
channelsareunobstructed
3.4) Check if the ignition plug is damaged
3.5) Is the clearance between the inner wind
turbinetoolarge
4) lgnite normally but still report ignition failure fault
Check if the casing temperature sensor is in full
contact with the casing, if the pressure spring is
strong, and if the sensor is functioning properly