Why doesn't the automatic closing function of the fuel filler cap work?
In order to move forward to your case, could you please kindly help us confirm the following information?
1. Check if there is any foreign matter
2. Please check whether the fuel tank is higher than the oil gun. In this case, the oil gun will also produce oil.
3. When the quantitative refueling mode of the tanker is completed, the fuel supply system of the tanker will stop and the oil gun will not automatically close, so the oil gun needs to be closed manually.
If it still doesn't work, the sensor inside the refueling nozzle may be broken. We will send the refueling gun to you and could you please kindly contact us at support@brearo.com
Related Articles
Why the Led or LCD screen doesn’t work?
Maybe the buttons are blocked by stickers, or the screws on the back of the display board are tightened too much, so the buttons are blocked. Please try loosening the screws a little, especially the one near the function buttons. This will allow the ...
Why does my machine not work and light is off?
To confirm the issue in detail, could you please kindly help us confirm the following information? 1. Check cable and wire connections. 2. Check the wiring of the gear switch and wiring cap to ensure that the wiring is firm. 3. Replace with a new ...
Recommendations for the humidor heating function:
When using the heating function, it is recommended to set the temperature 2-3℃ higher than the ambient temperature. The sensor can detect the temperature more easily and allow the humidor to work properly.
Why does the fan of my machine not work?
To confirm the issue in detail, could you please kindly help us confirm the following information? Wondering if the fan wiring is connected correctly? If it still don’t work, Wondering if you can take a short vide for us at services@callsupport.com ...
Why doesn't my chiller work?
Please kindly help us confirm the following information: 1.Could you please kindly advise us the current temperature of water and the temp you set? Because the set temperature must be 5° lower than the actual water temperature for the chiller to work ...